How to Root the HTC One step by step ( download links

How to Root the HTC One

The new HTC flagship device is pretty hot right now, and it serves as an interesting middle ground between a Nexus-style root, and the more hackery ones. Like the Nexus, we need to unlock the bootloader, but it’s encrypted on this phone. To unlock, you need to register as an HTC developer on the HTC Dev site (it’s free).

Just like above, you’ll need the Android SDK, USB drivers, and fastboot drivers. Installing the HTC Sync Manager will get you the drivers you need, but the HTC Dev site will provide you with Fastboot and a few other files. Backup the phone, as unlocking the bootloader will reset everything.

SEXPAND

1 - Go to the HTC Dev site and follow the instructions to get into bootloader mode. You will disconnect the device from PC, turn it off, press and hold Volume Down and the Power button to access the Bootloader.

2 - Use the volume keys to select fastboot mode, and select it with power. When the device does its thing, connect it to the PC again.

3 - On your PC, go to the folder with all the ADB and Fastboot files and open a command prompt. Type fastboot devices and hit enter. The HTC One should show up as a device ID.

4 - Enter fastboot oem get_identifier_token. This will spit out a big block of text, which you will then copy and paste into the HTC Dev site when it asks for it. Wait a bit, and HTC will send you the unlock token. Place it in the Fastboot folder.

SEXPAND

5 - With the HTC One still in Fastboot mode, type fastboot flash unlocktoken Unlock_code.bin. Now you’re unlocked, so it’s time to root. Reboot the phone normally and download the SuperUser zip file from Koush. Transfer it to the device.

6 - Download TWRP recovery for the HTC One and place it in the directory with your Fastboot and ADB files.

7 - Open another command prompt and get your device back into Fastboot mode just like above. Type fastboot flash recovery twrp.img and hit enter.

SEXPAND

8 - Turn off the HTC One and turn it on in Bootloader mode by holding the Volume Down + Power button. Select Recovery and wait for the device to load.

SEXPAND

9 - In Recovery, go to install and select the SuperUser zip. The zip will flash, and that’s it. You’re rooted.

---

*** UPDATE **** As most of you know android 4.4 is being released for the Sprint HTC One. As i continue to support this thread i have tested the OTA update to android 4.4 KitKat and this update does not break your 3g or flash. The radio for this update remains at Baseband - 1.00.20.1108 which means even after taking the OTA update you can still flash the Sprint HTC One to Page Plus if you have not done so**** UPDATE *****

FLASH SPRINT HTC ONE TO PAGEPLUS

FULL GUIDE

******* Not responsible if you brick, break, blow up or whatever to your phone*********

Items you will need:
1. A Sprint HTC One

2. Drivers (Install HTC Sync and it will install the standard drivers)

2A. 9K Drivers (Download)

3. DFS CDMA TOOLS Free version is fine.

4. Page Plus PRL (Download )

	pageplusprl.zip - [Click for QR Code] (3.2 KB, 206 views)
	HTC_Diag_Drivers.rar - [Click for QR Code] (108.3 KB, 195 views)

AFTER YOU HAVE EVERYTHING ABOVE PROCEED BELOW for guide 

http://cdmaflashingguide.blogspot.com/2014/03/how-to-flash-sprint-htc-one-to-pageplus.html

How to Flash Sprint HTC One To pageplus step by step guide

You will need your MSL Code to Continue (Call sprint or use sprint chat and tell them no matter what you do it asks for the MSL code and keep trying until you get it. Might be other ways to get it on this site

Collect needed files here: http://cdmaflashingguide.blogspot.com/2014/03/update-as-most-of-you-know-android-4.html


1. Call PagePlus and create a new account and have them add your phone. (Online chat works great)2. On the HTC One Dial ##XXXXXX# (X= your 6 digit MSL Code)3. Select Edit mode4. Select Mobile Directory Number (MDN) and enter your phone number then hit OK5. Select MSID and enter your MIN number (If you dont know call pageplus and ask they will give it to you)6. (After all the drivers are installed) Connect Phone to your computer with your USB Chord.7. On the HTC One Dial ##3424# press 1. ON it will Highlight in Gray, then press select and enter your 6 digit MSL.8. On the HTC One Dial ##737425# press 1. ON it will Highlight in Gray, then press select and enter your 6 digit MSL.9. Open DFS cdma tool, Click on ports on the top left, Double Click on HTC Diagnostic Interface 9K10. Type your 6 digit MSL code and click SPC and you should see in the log say unlocked11. Then click on the NAM tab, on over on the right you will see PRL, Click load and select your page plus PRL you downloaded and then click on write. (Write to UseNam1 and UseNam2) (Write them 2x to make sure they stick)12. Click on the DATA Tab and under account settings put in:(Without donor phone this will only get you 1x , If you need 3G keys visit http://goo.gl/Eq7Rfz)

PAP
UID: yourphonenumber@vzw3g.com
PWD: samsung

PPP
SIP NAI: yourphonenumber@dun.vzw3g.com
UID: yourphonenumber@vzw3g.com
PWD: vzw

HDR AN
NAI: yourphonenumber@vzw3g.com
PWD: vzw

HDR AN LONG
UID: yourphonenumber@vzw3g.com
PWD: vzw

HDR AN PPP
UID:
PWD:

On the right under mode change to:
HDR SCP force AT config: RevA_MFPA
HDR SCP force release 0 config : EVDO_RevA
Hybrid preferred mode: Enable
Data MDR (HSPD) mode: SO33_Pref
Data service option: IS707
CLICK WRITE (Do this 2 times to confirm it wrote)

13. Click on Mobile IP Tab and enter:

DS QcMIP: PrefMobileIP

Profile Settings:
Active profile: 0
Number of Profiles: 1

Registration settings:
Retries count: 2
Pre-Reg timeout: 30
Retries interval: ms1750

settings:
2002 BIS MN HA AUTH: Put a check mark
Domant handoff: Put a check mark
PRQ IF Traffic:

Under profile column:
Select the first bubble and make active (Right click, enable profile)
Make sure all other profiles are Disabled (Righ click, Disable profile)

Selected profile settings:
*** Make sure profile 1 bubble is BLUE****

Current User Profile
NAI: yourphonenumber@vzw3g.com
Home address: 0.0.0.0 MN HA SPI set: Check box 300
Prim HA address 255.255.255.255 MN AAA SPI set: Check box 2
Sec HA address 255.255.255.255 Reverse Tunneling pref: Check box

Share Secret User Profile
AAA Shared Secret
Enter value in HEX: Check Box
(In white box enter: vzw)

HA Shared Secret
Enter value in HEX: Check box
(In white box enter: vzw)

Detail
RM NAI : yourphonenumber@dun.vzw3g.com
DMU PKOID: 10 DMU MN Auteth: 1.178.7

CLICK ON " Write current profile settings" do this 2x to make sure everything stuck

P.S - If you need 3G keys PM and i can pull them for you, Remember after you put in the 3g keys and write them, DO NOT READ THEM AGAIN OR IT WILL CLEAR THEM OUT AND SHOW AS NOTHING WAS PUT IN, So enter the password and click write 2 x each and then do not read after that.


14. Click Reset in the top right, and restart phone!
15. Once phone is restarted:
Dial ##3282# click Edit Mode
Enter your MSL code (6 digit code)
Click on EVDO then Click on DDTM and make sure it is Enabled. Then hit okay and then hit the back key (<)
Click on Advanced, Scroll to the the very bottom, Click on eHRPD and set to Disable then hit ok.
Click on LTE and Disable that also, and click ok.
Now in the top right of the phone click menu, and click on commit modifications and your phone should restart with 3G providing keys were pulled for you, If you need keys visit http://goo.gl/Eq7Rfz

Youtube streaming and MMS:
Dial ##3282#, tap edit and enter your MSL (6 digit code) click Advanced then click on RTSP/HTTP Setting change it to:
RTSP proxy ip: 0.0.0.0
RTSP proxy port: 0
HTTP proxy ip: 0.0.0.0
HTTP proxy port: 0
Then Click back (<)

Then click on MMSC
Name: PP (whatever you want)
MMSC: HTTP://MMS.VTEXT.COM/SERVLETS/MMS or http://mms.vtext.com/servlets/mms?X-VZW-MDN=PHONENUMBER
MMS Proxy: Leave Blank
MMS Port: 80 or 8080
MMS Protocol: WAP 2.0
Click top right 3 dots.
Click Save.
Should Say APN Saved.

Clean up! (If your flashing the 10.key follow the process below before doing step A and B)
A. On the HTC One Dial ##3424# press 2. OFF it will Highlight in Gray, then press select.
B. On the HTC One Dial ##737425# press 2. OFF it will Highlight in Gray, then press select.

PM me if you need any help!
If this guide helps you please say thanks!

[GUIDE] Root for HTC One SV

Now quicker and easier!

Please note, this CAN brick your phone. Do not proceed if you are not confident in your ability.
Any damages caused are your own problem and I withhold any liability for any future issues caused by this process

Just a small note, I am aware of the screen in recovery moving, this is because of HTC's framebuffer method, I haven't been able to fix it yet.
1: Unlock your phone at the htcdev site, follow the instructions on the site


2: Download the following two files. Download either ClockworkMod Recovery for ICS OR Clockworkmod Recovery for JB depending on which version you are on and Superuser.zip, Move the Superuser.zip to somewhere on your phone's SD card.

3: reboot your phone into hboot and then into fastboot if you are not already there

4:

Code:

fastboot flash recovery recovery.img

this is presuming the recovery.img is in the same directory as fastboot, you can either move it or point the code to it directly

5: open recovery.

6: Flash the superuser.zip through recovery

7: reboot

8: Congratulations, your phone should now be rooted, go have fun with the ability to access your phone fully!

Edit: Here is a copy of the stock recovery recovery_signed.img

For those who want to install busybox, check out 
Also, due to the current issues I still haven't had the time to fix I'd suggest using the TWRP recovery for the time being.